车间焊接烟尘如何处理--焊烟除尘设备的选型指南
目前焊接行业存在焊接环境的脏乱差的问题。而随着环保监督力度不断加强，工人以及工厂周边居民对生活质量的诉求不断提高，焊接环境的改善已经成了工厂亟待解决的问题。所以焊接烟尘净化是环保行业重点主题之一。
At present, there is a problem of dirty and messy welding environment in the welding industry. With the continuous strengthening of environmental supervision and the increasing demand for quality of life among workers and residents around the factory, improving the welding environment has become an urgent problem that the factory needs to solve. So welding smoke purification is one of the key themes in the environmental protection industry.
焊接车间工况多种多样，有自动焊接手工焊接还有机器人焊接，焊接工件的尺寸也大小不一，那该如何选择净化方式呢？一起来看下。
There are various working conditions in the welding workshop, including automatic welding, manual welding, and robot welding. The size of the welded workpieces also varies. So, how to choose the purification method? Let's take a look together.
01抵近式，吸气臂源头收集
01 Close up type, suction arm source collection
吸气臂式焊接烟尘净化系统针对于焊接点位集中，焊接工位固定的焊接工况，可以采用万向吸气臂式。吸气臂可万向摆动，任意悬停，可以根据焊接点位调整吸罩位置，在焊接作业时移动吸气臂至焊接点即可抽吸焊接产生的烟尘，从而实现在尘源点近距离收集。
The suction arm type welding smoke purification system can adopt a universal suction arm type for welding conditions with concentrated welding points and fixed welding stations. The suction arm can swing and hover freely, and the position of the suction hood can be adjusted according to the welding point. During welding operations, moving the suction arm to the welding point can suction the smoke and dust generated by welding, thus achieving close collection at the dust source point.
适用于有固定位置的手工焊接工况或预留烟道的焊接专机
Suitable for manual welding conditions with fixed positions or welding machines with reserved flues
02覆盖式，顶吸罩上方收集
02 Covering type, collected above the top suction hood
顶吸罩式焊接烟尘净化系统针对焊接工位较固定，无行车或少行车参与的情况可采用顶吸罩式焊烟净化系统，顶吸罩覆盖焊接加工区域，笼罩焊接工件及焊接设备，焊接烟尘被抽吸后经管道到达除尘器过滤净化。适用于焊接专机、焊接机器人、手工焊接等焊接位置固定的区域
The top suction hood welding smoke purification system can be used for situations where the welding station is relatively fixed and there is little or no crane participation. The top suction hood covers the welding processing area, covers the welding workpiece and welding equipment, and the welding smoke is sucked through the pipeline to reach the dust collector for filtration and purification. Suitable for areas with fixed welding positions such as welding machines, welding robots, and manual welding
03可移动覆盖式顶吸罩
03 Mobile covered top suction hood
移动式顶吸罩焊烟净化系统针对焊接工位规律性移动、旋转（如：自动焊接机器人），行车参与少或周期长。其他无法外置净化器的场所可采用多功能除尘器+移动式顶吸罩来收集焊接烟尘。在焊接作业时顶吸罩跟随机器人移动覆盖焊接工件和机器人，焊接产生的烟尘被抽吸进入一旁的多功能除尘器，烟尘经净化后洁净空气室内排放。适用于焊接机器人或工件需要经常移动的焊接区域
The mobile top suction hood welding smoke purification system is designed for the regular movement and rotation of welding stations (such as automatic welding robots), with minimal or long driving participation. In other places where an external purifier cannot be used, a multifunctional dust collector and a mobile top suction hood can be used to collect welding fumes. During welding operations, the top suction hood follows the robot to move and cover the welded workpiece and robot. The smoke generated during welding is sucked into the nearby multifunctional dust collector, and the smoke is purified before being discharged into the clean air chamber. Suitable for welding areas where welding robots or workpieces require frequent movement
04整体除尘，吹吸除尘系统
04 Integrated dust removal, blowing and suction dust removal system
车间整体吹吸循环除尘系统针对大型工件的焊接，会存在焊接工件无固定位置，且焊接位置无法固定的情况，针对此类情况可以采用车间自循环式净化一体机。设备吸入烟尘气体后吹出洁净空气，带动车间空气循环，完成车间内的整体通风除尘。
The overall blowing and suction circulation dust removal system in the workshop is designed for welding large workpieces. There may be situations where the welded workpiece has no fixed position and the welding position cannot be fixed. For such situations, a workshop self circulating purification integrated machine can be used. After inhaling smoke and dust gas, the equipment blows out clean air, driving the air circulation in the workshop and completing the overall ventilation and dust removal in the workshop.
适用于焊接位置无法固定，焊接工件较大（如钢结构加工车间，造船造车）等工况
Suitable for working conditions where the welding position cannot be fixed and the welded workpiece is large (such as steel structure processing workshops, shipbuilding and vehicle manufacturing)
05伸展灵活,伸缩房除尘系统
05 Flexible Extension, Expansion Room Dust Removal System
伸缩房式焊接烟尘净化系统针对大型工件焊接，可能工件的挪动需要采用天车牵引，且区域过小在无焊接任务的情况下焊接区域需挪做他用。这种工况通常可以采用伸缩房式抽尘净化。伸缩房使用时展开包围焊接区域，焊接在内部进行，烟尘被抽吸进入除尘器过滤净化，作业结束后伸缩房折叠，露出焊接区域和焊接工件，方便工间转移。
The telescopic welding smoke purification system is designed for welding large workpieces. The movement of the workpiece may require the use of overhead crane traction, and the welding area may be too small to be used for other purposes without welding tasks. This type of working condition can usually be treated with a telescopic room style dust extraction and purification. When using the telescopic room, the surrounding welding area is unfolded and the welding is carried out internally. The smoke and dust are sucked into the dust collector for filtration and purification. After the operation is completed, the telescopic room is folded to expose the welding area and workpiece, making it convenient for transfer between workstations.
适用于大型工件/异型工件焊接、或天车转移工件工况。
Suitable for welding large/irregular workpieces, or transferring workpieces with overhead cranes.
06全包围，焊接房式除尘系统
06 Fully enclosed, welding room style dust removal system
焊接房式烟尘净化系统针对自动焊接机器人，焊接工位固定，焊接烟尘产生量大，作业自动化程度高的的焊接工况，可以采用焊接房式烟尘净化系统，焊接房包围加工区域，焊烟被从房顶抽吸进入除尘器净化过滤，烟尘无法外散。
The welding room type smoke and dust purification system is designed for automatic welding robots, fixed welding stations, high levels of welding smoke and dust generation, and highly automated welding conditions. The welding room type smoke and dust purification system can be used, with the welding room surrounding the processing area. The welding smoke is drawn from the roof into the dust collector for purification and filtration, and cannot be dispersed.
适用于焊接机器人有固定位置且焊接烟尘产生量大的工况
Suitable for working conditions where welding robots have fixed positions and generate a large amount of welding fumes
07移动式净化，焊烟净化器
07 Mobile Purification, Welding Smoke Purifier
移动式焊烟净化器针对于焊接点位分散焊接无固定位置的可采用焊烟净化器收集净化。焊烟净化器带有轮子和吸气臂，可移动至焊接区域从焊接源头抽吸焊接烟尘，焊接烟尘经设备净化后洁净空气达标排放
Mobile welding smoke purifier can be used to collect and purify welding smoke for scattered welding points without fixed positions. The welding smoke purifier is equipped with wheels and a suction arm, which can be moved to the welding area to suck welding smoke from the welding source. The welding smoke is purified by the equipment and the clean air meets the standard for emission
适用于无固定位置、焊接烟尘量小的手工焊接工况
Suitable for manual welding conditions with no fixed position and low welding fumes
本文由 焊烟除尘设备 友情奉献.更多有关的知识请点击 http://www.sdcjtz.com/ 真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
This article is a friendly contribution from Welding Smoke Dust Removal Equipment For more related knowledge, please click http://www.sdcjtz.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.
鲁公网安备 37142502000144号